Spraying AG
Spraying AG is through the gun or disc atomizer, with the help of pressure or centrifugal force, sub-micron silica and other particles evenly coated on the surface of the glass, after heating and curing process, the formation of a layer of particles on the surface of the glass, the diffuse reflection of light to achieve the anti-glare effect.
The spraying AG advantages
1. The AG anti-glare liquid is directly sprayed on the glass surface to form a film, the liquid does not need any pretreatment, the surface of the workpiece only needs to do degreasing and dust-free cleaning treatment.
2. Surface hardness can reach 6H~9H.
3. The production yield can be controlled above 95% basically.
4. AG film layer defective products can be heavy industry, the glass can be put back into processing.
5. The mechanized standard operation, batch stability, high yield rate, low labor cost.
Chemical Etched AG
Chemical etched AG is the use of chemical reactions to turn the glass surface from a smooth surface into a micron-level particle surface. The process principle is more complex, is the ionization balance, chemical reactions and dissolution, and recrystallization, ion replacement and other reactions together, AG effect and particle size and shape by the composition and concentration of the reactant size, reaction time, temperature, and other factors, the production is difficult, high technical content.
Chemically Etched AG advantages
1. The etched AG layer exists for a long time and there is no problem with shedding.
2. Etched AG glass can be processed by any cold processing, such as grinding and cutting, tempering, and other processing, the AG effect will not change.
3. Good weather resistance, especially for outdoor applications, will not reduce the AG effect due to wind and sun.
4. The AG layer does not contain volatile substances.
5. Not only can be applied to medium and large-size products, but the advantages are also more obvious in small and micro-size products.
